Atomic Resolution Imaging and Measurement of the Local Density of States of Graphite, Gold and Silicon using Scanning Tunnelling Microscopy

Ahmed Abdelwahab

Published 2022-09-09Version 1

A series of experiments were conducted using the STM instrument, which involves a conducting tip probe to analyse sample surfaces by measurements of a tunnelling current. In this experiment, STM was used to (1) determine the lattice constant of Highly Oriented Pyrolytic Graphite (HOPG) by acquiring atomic resolution images of its surface, (2) measure the work functions of gold (Au) and HOPG samples using the STS mode and, (3) compare the variation of the Local Density of States (LDOS) of gold, graphite and Silicon (Si) samples with respect to bias voltage V. Experimental values of the lattice constant of HOPG and work functions for gold and graphite were determined as 0.27 +/- 0.2 nm, 0.7 +/- 0.1 eV and 0.5 +/- 0.1 eV respectively. The lattice constant deviated slightly from the literature value of 0.246 nm, whereas the work functions deviated significantly from the literature values of 5.40 eV for gold and 4.62 eV for graphite. The LDOS for gold was found to be the highest, followed by graphite, then silicon. These findings will be discussed.