Turbulent Rayleigh-Bénard convection with bubbles attached to the plate

Hao-Ran Liu, Kai Leong Chong, Rui Yang, Roberto Verzicco, Detlef Lohse

Published 2022-05-23Version 1

We numerically investigate turbulent Rayleigh-B\'enard convection with gas bubbles attached to the hot plate, mimicking a core feature in electrolysis, catalysis, or boiling. The existence of bubbles on the plate reduces the global heat transfer due to the much lower thermal conductivity of gases as compared to liquids and changes the structure of the boundary layers. The numerical simulations are performed in 3D at Prandtl number Pr=4.38 (water) and Rayleigh number $10^7\le Ra \le10^8$. For simplicity, we assume the bubbles to be equally-sized and having pinned contact lines. We vary the total gas-covered area fraction $0.18 \le S_0 \le 0.62$, the relative bubble height $0.02\le h/H \le0.05$ (where $H$ is the height of the Rayleigh-B\'enard cell), the bubble number $40 \le n \le 144$, and their spatial distribution. In all cases, asymmetric temperature profiles are observed, which we quantitatively explain based on the heat flux conservation at each horizontal section. We further propose the idea of using an equivalent single-phase setup to mimic the system with attached bubbles. Based on this equivalence, we can calculate the heat transfer. Without introducing any free parameter, the predictions for the Nusselt number, the upper and lower thermal boundary layer thicknesses, and the mean centre temperature well agree with the numerical results. Finally, our predictions also work for the cases with much larger Pr (e.g. $400$), which indicates that our results can also be applied to predict the mass transfer in water electrolysis with bubbles attached to the electrode surface or in catalysis.