{
  "id": "2401.11793",
  "version": "v1",
  "published": "2024-01-22T09:45:28.000Z",
  "updated": "2024-01-22T09:45:28.000Z",
  "title": "Aspect-ratio effect on the wake of a wall-mounted square cylinder immersed in a turbulent boundary layer",
  "authors": [
    "Gerardo Zampino",
    "Marco Atzori",
    "Elias Zea",
    "Evelyn Otero",
    "Ricardo Vinuesa"
  ],
  "categories": [
    "physics.flu-dyn"
  ],
  "abstract": "The wake topology developing behind a wall-mounted square cylinder in a turbulent boundary layer has been investigated using a high-resolution large-eddy simulation (LES). The boundary-layer thickness at the obstacle location is fixed, the Reynolds number based on the cylinder h and the incoming free-stream velocity $u_\\infty$ is 10,000 while the aspect ratio (AR), defined as obstacle height divided by its width, ranges from 1 to 4. The Reynolds stresses, anisotropy-invariant maps (AIM) and the turbulent kinetic energy (TKE) budget are analyzed to investigate the influence of AR on the wake structures and on the turbulence production and transport. In particular, the transition from a dipole configuration for low AR to a quadrupole wake is extensively discussed and examined. The necessity of more data to express this critical AR as a function of the momentum-thickness-based Reynolds number $Re_{\\theta}$ is thus highlighted. As an effect of the AR, the wake is deformed in both streamwise and spanwise directions. This contraction of the wake, attributed to the occurrence of the base vortices for the cases AR = 3 and 4, impacts the size of the positive production region that stretches from the roof and the flank of the obstacle to the wake core. The AIMs confirm the wake three-dimensionality and are used to describe the redistribution of the turbulent kinetic energy (TKE) along the three normal directions, in agreement with the literature [A. J. Simonsen and P. Krogstad, Phys. Fluids 17, 088103, (2005)]. The present analysis on the TKE budget displays a stronger turbulence production for the cases AR = 3 and 4, demonstrating the strong influence of the tip and base vortices in generating turbulence at the wall location behind the cylinder.",
  "revisions": [
    {
      "version": "v1",
      "updated": "2024-01-22T09:45:28.000Z"
    }
  ],
  "analyses": {
    "keywords": [
      "turbulent boundary layer",
      "wall-mounted square cylinder",
      "aspect-ratio effect",
      "turbulent kinetic energy",
      "turbulence production"
    ],
    "note": {
      "typesetting": "TeX",
      "pages": 0,
      "language": "en",
      "license": "arXiv",
      "status": "editable"
    }
  }
}