{
  "id": "2304.03499",
  "version": "v1",
  "published": "2023-04-07T06:43:56.000Z",
  "updated": "2023-04-07T06:43:56.000Z",
  "title": "Linear stability analysis of non-isothermal plane Couette flow in an anisotropic and inhomogeneous porous layer underlying a fluid layer",
  "authors": [
    "Nandita Barman",
    "Anjali Aleria",
    "Premananda Bera"
  ],
  "categories": [
    "physics.flu-dyn"
  ],
  "abstract": "This paper carries out a linear stability analysis of a plane Couette flow in a porous layer underlying a fluid layer where the porous layer is anisotropic and inhomogeneous. The plane Couette flow is induced due to the uniform movement of the upper plate and convection arises due to the maintenance of the temperature difference between the upper plate and the lower plate. The fluid considered is Newtonian and incompressible. Darcy model is used to narrate the flow in the porous layer and at the interface, the Beavers-Joseph condition is used. The Chebyshev collocation method is used to solve the generalized eigenvalue problem. Here, the effect of anisotropy and inhomogeneity of the porous medium, along with the ratio of the thickness of fluid to porous layer, i.e., depth ratio $(\\hat{d})$, Reynolds number $(Re)$ and Darcy number $(\\delta)$ are studied. The analysis is carried out majorly for water; however, the impact of anisotropy and inhomogeneity on different fluids by varying Prandtl number ($Pr$) is also studied. Depending on the value of parameters, the unimodal (porous mode or fluid mode), bimodal (porous mode and fluid mode) and also trimodal (porous mode, fluid mode and porous mode) nature of the neutral curve is obtained. The increasing value of the inhomogeneity parameter, depth ratio or decreasing value of the anisotropy parameter, Reynolds number, Prandtl number and Darcy number raises the system instability. For $\\delta=0.002$, $Pr=6.9$ and $Re=10$, dominating nature of porous mode is always observed for $\\hat{d}<0.07$, and fluid mode for $\\hat{d}>0.21$ irrespective of anisotropy and inhomogeneity parameter. With the help of energy budget analysis, the types of instability are categorized and also the types of mode obtained from linear stability analysis are verified. Secondary flow patterns are also visualized to understand the flow dynamics.",
  "revisions": [
    {
      "version": "v1",
      "updated": "2023-04-07T06:43:56.000Z"
    }
  ],
  "analyses": {
    "keywords": [
      "linear stability analysis",
      "non-isothermal plane couette flow",
      "inhomogeneous porous layer",
      "fluid layer",
      "porous mode"
    ],
    "note": {
      "typesetting": "TeX",
      "pages": 0,
      "language": "en",
      "license": "arXiv",
      "status": "editable"
    }
  }
}