{
  "id": "1806.02551",
  "version": "v1",
  "published": "2018-06-07T07:59:07.000Z",
  "updated": "2018-06-07T07:59:07.000Z",
  "title": "Photonic engineering of InP-based structures to improve the emission extraction efficiency from a single quantum dot at 1.55 μm",
  "authors": [
    "Paweł Mrowiński",
    "Grzegorz Sęk"
  ],
  "comment": "11 pages, 7 figures",
  "categories": [
    "cond-mat.mes-hall"
  ],
  "abstract": "Hereby, we present finite-difference time-domain (FDTD) simulation results on engineering of technologically undemanding photonic structures offering a significant and spectrally-broad improvement in extraction efficiency of emission at the third telecommunication window. The modelling of the extraction efficiency has been performed for cylindrical and rectangular mesa structures containing an exciton confined in a single quantum dot emitting at 1550 nm. We used FDTD method to characterize the emission pattern from such mesas made of InP or interchangeable AlGaInAs for two cases: monolithic InP substrate and InP/AlGaInAs distributed Bragg reflector (DBR) underneath the mesa. The calculations have been performed in function of the system geometrical parameters, i.e. mesa shape and dimensions, and the emitter position. Our results show that extraction efficiencies of 25 % are achievable for numerical aperture of 0.4 of a common optical detection system. We also observed that the extraction efficiency is rather weakly sensitive to the in-plane dipole alignment and exhibits significantly higher susceptibility to even slight changes in its vertical position or in mesa geometry. We also comment on the influence of the Purcell effect on the total emission power leading to its enhancement for structures with high extraction efficiency. Finally, we have calculated the extraction efficiency dependence versus the numerical aperture of the first detection lens to verify the practical limits, which appeared to be about 47 % for NA of 0.9 and for the considered structures with DBR.",
  "revisions": [
    {
      "version": "v1",
      "updated": "2018-06-07T07:59:07.000Z"
    }
  ],
  "analyses": {
    "keywords": [
      "single quantum dot",
      "emission extraction efficiency",
      "inp-based structures",
      "photonic engineering",
      "undemanding photonic structures offering"
    ],
    "note": {
      "typesetting": "TeX",
      "pages": 11,
      "language": "en",
      "license": "arXiv",
      "status": "editable"
    }
  }
}